For Counsel

Prev12345Next

Leuze Electronic 50113549 BT D12...

Leuze-Electronic-BT-D12M-5-Mounting-Bracket-for-212-Series-Sensors-Leuze-Electronic-50113549-A-stainless-steel-angle-bracket-suitable-for-mounting-b-Leuze-Electronic-b-212-series-sensors-Leuze-Electronic-50113549-BT-D12M-5-Mounting-Bracket-for-212-Series



Click For Info
Leuze Electronic 50113548 BT D18...

Leuze-Electronic-BT-D18M-5-Mounting-Bracket-for-218-318-Series-Sensors-Leuze-Electronic-50113548-A-stainless-steel-angle-bracket-suitable-for-mounting-b-Leuze-Electronic-b-218-and-318-series-sensors-Leuze-Electronic-50113548-BT-D18M-5-Mounting-Bracket-for-218-318-Series



Click For Info
IFM E11797 Cylindrical Adapt Tie...

IFM-Electronic-Tie-Rod-Adaptor-for-Integrated-Profile-Cylinders-IFM-Electronic-E11797-This-tie-rod-adaptor-is-designed-for-use-with-b-MKT-b-series-T-slot-cylinder-sensors-IFM-E11797-Cylindrical-Adapt-Tie-Rod-for-Cylinder-Sensors



Click For Info
B+B Sensors CON-SIFI-HYANA Polye...

B+B Sensors Sintered Polyethylene Filters for Humidity Probes - B+B Sensors CON-SIFI-HYANA, A sintered polyethylene filter, for use with humidity probes, that will protect against dust deposits and contamination. The filter is hydrophobic and water resistant and is also suitable for use with other...



Click For Info
B+B Sensors SIFI-TC 2 Polyethlen...

B+B Sensors Sintered Polyethylene Filters for Humidity Probes - B+B Sensors SIFI-TC 2, A sintered polyethylene filter, for use with humidity probes, that will protect against dust deposits and contamination. The filter is hydrophobic and water resistant and is also suitable for use with other gas...



Click For Info
Leuze Electronic 50105546 BT 3B ...

Leuze-Electronic-BT-3B-Mounting-Bracket-for-3B-Series-Sensors-Leuze-Electronic-50105546-A-stainless-steel-angle-bracket-suitable-for-mounting-b-Leuze-Electronic-b-3B-series-sensors-Leuze-Electronic-50105546-BT-3B-Mounting-for-3B-Series



Click For Info
Leuze Electronic 50040269 BT 25 ...

Leuze-Electronic-BT-25-Mounting-Bracket-for-25-and-55-Series-Sensors-Leuze-Electronic-50040269-This-stainless-steel-angle-bracket-is-suitable-for-mounting-b-Leuze-Electronic-b-25-and-55-series-sensors-Leuze-Electronic-50040269-BT-25-Mounting-for-25-and-55-Series



Click For Info
Urban Factory Nice Ladys Vintage...

Trendy Vintage Collection Bag by Urban factory for laptops up to 12\'\'. Large front pocket and a padded internal compartment for laptops. Internal pocket with zip closure over different storage spaces for phone pens etc. ...



Click For Info
ESKA Bulgin 11328 Protective cov...

Bulgin Protective cover for IEC Connector for PF, 500 and 600 Series - ESKA Bulgin 11328, This ESKA Bulgin protective boot cushions the back of IEC plug connectors against accidental impact. ESKA Bulgin 11328 Protective cover for IEC Connector 500 and 600 Series



Click For Info
ESKA Bulgin 11987 Protective cov...

Bulgin Protective cover for IEC Connector for PF, 500 and 600 Series - ESKA Bulgin 11987, This ESKA Bulgin protective boot cushions the back of IEC plug connectors against accidental impact. ESKA Bulgin 11987 Protective cover for IEC Connector PF Series



Click For Info
ESKA Bulgin KT0006 Holding Clip ...

Bulgin Holding Clip for Fused and Non-fused IEC Mains Socket - ESKA Bulgin KT0006, The ESKA Bulgin clip prevents accidental removal of the plug. For use with non-fused IEC mains sockets. ESKA Bulgin KT0006 Holding Clip for Non-fused IEC Mains Socket



Click For Info
ESKA Bulgin KT0009 Holding Clip ...

Bulgin Holding Clip for Fused and Non-fused IEC Mains Socket - ESKA Bulgin KT0009, The ESKA Bulgin clip prevents accidental removal of the plug. For use with non-fused IEC mains sockets. ESKA Bulgin KT0009 Holding Clip for Fused IEC Mains Socket



Click For Info
TE Connectivity 640713-01 Strain...

TE-Connectivity-Strain-Relief-for-Universal-MATE-N-LOK-Socket-Connectors-TE-Connectivity-640713-01-The-TE-Connectivity-Strain-Relief-for-Universal-MATE-N-LOK-2-Pin-Socket-Connector-is-a-highly-reliable-multi-pin-plug-connector-for-internal-and-external-wiring-in-industry-TE-Connectivity-640713-01-St...



Click For Info
TE 189727-1 Extraction Tool for ...

Extraction Tools for Micro & Mini Mate-N-Lok Contacts - TE Connectivity 189727-1, Extraction and assembly tools for use with the TE Connectivity Micro and Mini Mate-N-Lok series of contacts. TE 189727-1 Extraction Tool for Mini Universal Mate-N-Lok Contacts



Click For Info
TE 843996-6 Extraction Tool for ...

Extraction Tools for Micro & Mini Mate-N-Lok Contacts - TE Connectivity 843996-6, Extraction and assembly tools for use with the TE Connectivity Micro and Mini Mate-N-Lok series of contacts. TE 843996-6 Extraction Tool for Micro Mate-N-Lok with Lance Reset



Click For Info
Adafruit 2348 Stepper Motor &amp...

Adafruit-Stepper-Motor-DC-HAT-for-Raspberry-Pi-A-B-or-2-Adafruit-2348-This-new-DC-Stepper-Motor-HAT-from-b-Adafruit-b-is-a-Raspberry-Pi-add-on-that-is-perfect-for-any-b-motion-b-project-being-able-to-drive-up-to-4x-DC-or-2x-stepper-motors-with-full-PWM-speed-control-An-onboard-fully-dedicated-PWM-dr...



Click For Info
Seeed 110060131 Grove Starter Ki...

Seeed-Starter-Kit-for-BeagleBone-Green-Seeed-Studio-110060131-p-The-Grove-Starter-Kit-for-BeagleBone-from-Seeed-Studio-gets-you-off-to-a-flying-start-on-your-next-project-It-includes-9-of-their-most-popular-Grove-modules-but-what-is-Grove-Seeed-describe-it-as-a-modular-electronic-platform-for-quick-...



Click For Info
Adafruit 2024 12 x Capacitive To...

Adafruit-Capacitive-Touch-Shield-for-Arduino-MPR121-Adafruit-2024-P-The-Adafruit-Capacitive-Touch-Shield-for-Arduino-lets-your-next-project-get-super-interactive-with-12-x-touchable-objects-as-its-user-interface-The-requirements-for-the-touchable-objects-is-pretty-broad-they-can-be-made-of-metal-or-...



Click For Info
Seeed 103030009 Relay Shield For...

Seeed-Relay-Shield-For-Arduino-V3-0-Seeed-Studio-103030009-P-The-Arduino-Relay-Shield-from-Seeed-Studio-gives-you-4-relays-that-will-switch-7A-at-35V-DC-each-easily-enough-for-most-applications-Screw-terminals-are-provided-for-the-connections-to-the-device-being-switched-and-an-LED-indicator-shows-t...



Click For Info
Adafruit 1162 SMT Breakout PCB f...

Adafruit SMT Breakout PCB for QFN or TQFP 32 Pin - Adafruit 1162, The Adafruit SMT Breakout PCBs for 44-pin QFN or TQFP solve the problem that not all chips are available in breadboard friendly packages. With QFN pinouts on one side and TQFP pinouts on the other the boards also have space for...



Click For Info
Seeed 110060161 GrovePi+ Starter...

Seeed GrovePi+ and Starter Kit for Raspberry Pi A+, B, B+ and 2 - Seeed Studio 110060161, The GrovePi+ Starter Kit for Raspberry Pi from Seeed Studio gets you off to a flying start on your next project. It includes 12 of their most popular Grove modules, but what is Grove? Seeed describe it as \"a...



Click For Info
Pimoroni ProtoPal for Raspberry ...

Pimoroni-ProtoPal-Prototyping-Board-for-Raspberry-Pi-A-B-and-Pi-2-Pimoroni-ProtoPal-The-ProtoPal-is-an-affordable-prototyping-board-designed-to-be-used-with-the-Raspberry-Pi-A-B-and-Pi-2-The-ProtoPal-features-288-prototyping-holes-2x-separate-power-rails-and-a-fully-broken-out-GPIO-for-maximum-conve...



Click For Info
Velleman KA01 RGB Shield Kit for...

Velleman-KA01-RGB-Shield-Kit-for-Arduino-Velleman-KA01-A-kit-of-parts-that-assembles-into-a-RGB-shield-designed-for-use-with-Arduino-Uno-Arduino-Mega-and-Arduino-Due-boards-The-shield-will-enable-the-control-of-3x-dimmer-channels-1x-RGB-or-3x-single-channels-using-the-connected-Arduino-board-All-com...



Click For Info
Velleman KA03 Motor and Power Sh...

Arduino Motor & Servo Driver Boards - Velleman KA03, A kit of parts that assembles into a motor and power shield designed for use with Arduino Uno, Arduino Mega and Arduino Due boards. When assembled the shield can be used to drive relays, solenoids, DC and stepper motors. All components required...



Click For Info
Velleman KA05 In / Out Shield Ki...

Arduino Relay Shields - Velleman KA05, A kit of parts that assembles into an I/O shield designed for use with Arduino Uno, Arduino Mega and Arduino Due boards. When assembled the shield can be used as a general input/output shield for a connected Arduino board. All components required are provided...



Click For Info
Pimoroni Breadboard Base for Pib...

Pimoroni-Breadboard-Base-for-Pibow-Pimoroni-Breadboard-Base-for-Pibow-This-support-base-is-designed-to-replace-the-Pibow-case-bottom-and-provide-support-for-the-case-board-and-also-provide-space-for-a-prototyping-area-Pimoroni-Breadboard-Base-for-Pibow



Click For Info
Velleman KA02 Audio Shield Kit f...

Arduino Sound, Buzzer and MP3 Shields - Velleman KA02, A kit of parts that assembles into an audio shield designed for use with Arduino Uno, Arduino Mega and Arduino Due boards. The shield allows users to record their voice via a built-in microphone or via line input. The board will have buttons...



Click For Info
MikroElektronika MIKROE-1513 Ras...

MikroE-Raspberry-Pi-Click-HAT-Shield-for-B-and-Pi-2-MikroElektronika-MIKROE-1513-This-b-Click-b-shield-is-designed-for-use-with-the-b-Raspberry-Pi-b-B-and-Pi-2-The-shield-has-a-mikroBUS-host-socket-that-makes-the-Rasperry-Pi-compatible-with-more-than-70-different-types-of-Click-boards-Two-1-x-8-fema...



Click For Info
Pimoroni Unicorn HAT 8x8 RGB LED...

Pimoroni-Unicorn-HAT-8x8-RGB-LED-Matrix-for-Raspberry-Pi-Model-B-Pimoroni-Unicorn-HAT-P-The-Pimoroni-Unicorn-HAT-8-x-8-LED-matrix-is-specifically-designed-for-the-new-A-and-B-HAT-specification-Hardware-Attached-on-Top-The-HAT-specification-uses-two-dedicated-pins-on-the-extended-40-way-GPIO-header-t...



Click For Info
Adafruit 2465 PowerBoost Charger...

Adafruit-PowerBoost-Smart-Charger-for-Rechargeable-5V-LiPo-or-LiIon-Batteries-Adafruit-2465-The-b-PowerBoost-1000C-b-is-the-perfect-power-supply-for-a-portable-project-and-has-a-built-in-load-sharing-battery-charger-circuit-that-keeps-power-hungry-projects-running-even-whilst-recharging-the-battery-...



Click For Info
Adafruit 802 1.8\" TFT Display S...

Adafruit-802-1-8-TFT-Display-Shield-for-Arduino-Micro-SD-and-Joystick-Adafruit-802-P-The-Adafruit-1-8in-Colour-TFT-shield-displays-full-18-bit-colour-with-a-resolution-of-128-x-160-The-neat-display-is-complimented-by-a-5-way-joystick-for-user-input-and-a-micro-SD-card-socket-for-FAT16-FAT32-format-c...



Click For Info
Seeed 110060039 Grove Kit for Li...

Seeed-110060039-Grove-Kit-for-LinkitOne-IoT-Development-Board-Seeed-Studio-110060039-p-The-Grove-IoT-Development-Kit-for-LinkItOne-from-Seeed-Studio-gets-you-off-to-a-flying-start-on-your-next-project-Experiment-with-the-idea-of-IoTicity-with-10-of-Seeed-s-most-popular-Grove-modules-for-the-Internet...



Click For Info
Pimoroni PIM113 Display-O-Tron R...

Pimoroni-Display-O-Tron-RGB-16x3-LCD-Display-for-Raspberry-Pi-for-A-B-Pi-2-Pimoroni-PIM113-An-upgraded-HAT-version-of-the-Display-O-Tron-now-with-capacitive-touch-pads-a-six-zone-RGB-backlight-and-GPIO-breakout-pins-Features-a-super-slim-16-x-3-character-LCD-which-has-a-full-ASCII-character-set-wher...



Click For Info
Blueberry TXRX ABS Case for 75-0...

Blueberry Home Solutions Smart Hub for Raspberry Pi - Blueberry TXRXABS, This showerproof ABS case for the Blueberry wireless temperature and humidity sensor is designed to hold 1 x sensor board and 1 x PP3 battery. Using low power modes on the sensor board will allow it to transmit for up to a...



Click For Info
Adafruit 1092 Tactile On/Off Swi...

Adafruit Sewable Power for Wearables - Adafruit 1092, The Adafruit Tactile On/Off Switch is ideal for wearables with its squeeze to switch on, squeeze to switch off action. Measuring only 16 x 16 x 6mm it can handle 2A at up to 14V. Supplied with 190mm (7.5in.) wire tails. Adafruit 1092 Tactile...



Click For Info
StarTech.com DVI Docking Station...

StarTech.com DVI Docking Station for Laptops - USB 3.0 - Universal Laptop Docking Station - DVI Laptop Dock for Hot Desks - 4 x USB Ports - 4 x USB 3.0 - Network (RJ



Click For Info
StarTech.com HDMI Docking Statio...

StarTech.com HDMI Docking Station for Laptops - USB 3.0 - Universal Laptop Docking Station - HDMI Laptop Dock for Hot Desks - 4 x USB Ports - 4 x USB 3.0 - Network (



Click For Info
Adafruit 2310 Perma-Proto HAT fo...

Adafruit-Perma-Proto-HAT-for-Raspberry-Pi-A-B-or-2-Adafruit-2310-The-b-Adafruit-Perma-Proto-HAT-b-is-a-plug-in-daughterboard-that-is-compatible-with-the-Raspberry-Pi-A-B-and-Pi-2-The-board-has-a-grid-of-0-1-prototyping-solder-holes-for-attaching-chips-resistors-LEDs-potentiometers-etc-to-create-a-ve...



Click For Info
4world Desk Mount For Lcd/tv 13-...

A desk mount for LCD/TV sized at 13 - 24 inches. Suitable for 2 screens with adjustable height and arms with a maximum load of 15kg. Features- Desk mount- For LCD/TV 13 - 24 inch- For 2 screens with adjustable height and ...



Click For Info
StarTech.com 4K DisplayPort Dock...

StarTech.com 4K DisplayPort Docking Station for Laptops - USB 3.0 - Universal Laptop Docking Station - 4K DP Laptop Dock for Hot Desks - 4 x USB Ports - 4 x USB 3.0



Click For Info

Prev12345Next