Manfrotto
Working with the centre column in the horizontal position on the Manfrotto 055PRO, 190PRO, NEOTEC and MDEVE tripod families has always caused a slight difficulty, in that the head remains at 90° to the ground making it more difficult to position the camera correctly for shooting. Now this simple...
Click For Info
The Manfrotto Horizontal Bracket with two 3/8 inch mounting points allows you to mount a pair of cameras on a single tripod.
Click For Info
The Manfrotto 116SCK3 set consists of three rubber suction-cup feet with retractable metal spikes - ideal for both indoor and outdoor use. They are designed for use with the MT190CXPRO4 tripod.
Click For Info
The Manfrotto 204SCK3 set consists of three rubber suction-cup feet with retractable metal spikes - ideal for both indoor and outdoor use. They are designed to fit the MT055CXPRO3Â tripod.
Click For Info
The Manfrotto 152 converts a 5/8 inch (16mm) stud (lighting stand fitting) to a socket for 11/16 inch (17.5mm) male studs.
Click For Info
This stud is used to connect two Manfrotto Super Clamps together, with a 6-step fixed rotation.
Click For Info
The Manfrotto E650 is a 6 inch long pin, 5/8 inch diameter with 7/8 inch collar to prevent the pin from sliding through a grip clamp.
Click For Info
The Manfrotto 014-38 is a 5/8 inch (16mm) Female Adapter, designed to fit atop an 5/8 inch lighting stand top stud in order to allow vertical or horizontal mounting of accessories with a 3/8 inch thread receptor.
Click For Info
This set of three castor wheels are designed for use with various Manfrotto tripods and stands. The wheels are supplied with an adapter to fit 20mm diameter legs. They are equipped with brakes and are 7.5cm in diameter.
Click For Info
This Manfrotto 275 clamp is ideal for securing reflectors, subject manner, props and accessories.
Click For Info
This set of three castor wheels are designed for use with various Manfrotto tripods and stands. The wheels are designed to fit over 22mm diameter legs. They are equipped with brakes and are 10cm in diameter.
Click For Info
The Manfrotto 188 adapter features a 3/8 inch threaded hole at one end and a 5/6 inch (16mm) hole on the other.
Click For Info
The Manfrotto 375 Multiclip is usful for holding gels, reflectors and other small studio items.
Click For Info
The Manfrotto 196AB-2 is a two-section articulated arm. The top attachment is a 16mm (3/8 inch) spigot light attachment while the bottom attachment is via a a 16mm spigot (compatible with light attachment Superclamp) with 1/4 inch thread.
Click For Info
The Manfrotto 104G Wheel Set consists of three heavy duty 100mm diameter wheels with brakes which can be utilised to greatly enhance tripod mobility while working in your studio. Each has a M10 attachment.
Click For Info
The Manfrotto 015 Special Adapter is an adapter with a 3/8\" screw attachment thread on one side and a 1/4\" female thread on the other.
Click For Info
Manfrotto 039 Set of 2 U-hooks with a 40mm diameter, suitable for supporting cross-bars.
Click For Info
Manfrotto 041 Set of 2 L Brackets are a pair of 17x4cm brackets for supporting shelves.
Click For Info
The Manfrotto 244 Arm is a jointed aluminium camera arm with an adjustable, locking friction joint in the centre. One end is equipped with a camera/umbrella bracket, while the other features a Type 17 attachment.
Click For Info
The Manfrotto 158 Double 5/8 inch Female Adapter features a 5/8 inch (16mm) female thread on each end.
Click For Info
The Manfrotto 163-10 Adapter converts a female 28mm (1 and 1/8 inch) socket to a M10 thread. The adapter includes a circular mounting platform and wing nut fastening.
Click For Info
This Manfrotto 175 Spring Clamp is designed to securely clamp onto bars from 5mm to 40mm in diameter. It is fitted with both type 17 and type 1 attachment spigots.
Click For Info
This Manfrotto 196AB-3 3 Section Arm is an articulated arm which can be afixed to a tripod or similar mount in order to position accessories with precision. The arm can firmly and steadily hold 1kg at its full 85cm extension. The top attachment is a 16mm spigot 3/8\'\' light attachment, while the...
Click For Info
The Manfrotto 196B-2 Single Articulated Arm supports 1.5kg at full extension and extra versatility is provided by the sliding extension system which allows for easier positioning of lighting fixtures even in awkward and tight spaces. The maximum length of the arm is 605mm (23.8 inches) and the...
Click For Info
Designed for advanced video shooting, the Manfrotto Full Fluid Base (MVMXPROBASE) for XPRO Monopod (not included) is the first of its kind in the market to feature 3D fluidity for the ultimate smoothness in an extremely compact solution for advanced video shooting. Compatible with all XPRO Photo...
Click For Info
A set of dedicated spiked feet for the Manfrotto 055XPROB/CX3/CXPRO3 tripods. The spike is made from anodised aluminium designed to be resistant to corrosion and can be covered by a retractable rubber foot for use on hard surfaces. A dedicated fitting tool is supplied.
Click For Info
The Manfrotto 045-6 Background Paper Hooks is a set of two background holder hooks designed for use with up to six rolls of paper when using the Expan Drive system. They can be fixed to a wall with supplied studs and screws, or to Super Clamp 035 by means of the supplied screw set.
Click For Info
The Manfrotto 237 Flexible Arm is a handy tripod accessory with a multitude of uses. It has a 13mm diameter, is 55cm long, with hexagon stud to fit Super Clamp 035 with 3/8\'\' female thread on one end and a 16mm stud with 1/4\'\' male thread type 18 on the other.
Click For Info
The Manfrotto 015 Special Adapter is an adapter with a 1/4\" screw attachment thread on one side and a 3/8\" female thread on the other.
Click For Info
The Manfrotto 042 Extension Arm attaches to the 035 Super Clamp. It is 19.5cm long and constructed from lightweight aluminium. Attachment is via type 1 + spigot art.013 female attachment.
Click For Info
The Manfrotto 014-14 16mm Female Adapter is a locking adapter which fits on to any light stand with a 5/8\" top stud and allows vertical or horizontal mounting of a light fixture, flash, or camera which has a 1/4\" thread.
Click For Info
Suction Cap for lightweight photographic and video equipment, such as 35 mm. SLR, digital cameras and lightweight video cameras. The 6cm diameter disc with a 3/8\" W male thread is built in the pump cup and enables you to mount most of Manfrotto\'s flat-base heads.
Click For Info
The Manfrotto 234 all-aluminium car window pod coupled with the 234 Tilt Head is a great way of firmly supporting your camera or spotting scope for use in the car or from your back window. The head and window pod are easy to operate and offer 90 degrees of rotation. Quick Release plates are...
Click For Info
The Manfrotto 296 Photo Clamp can be attached to any edge with a depth up to 60mm - perfect for most work surfaces or desks in a studio environment. The clamp features two 3/8 inch male threads - allowing you to attach a ball or pan-tilt head.
Click For Info
The Manfrotto 036-14 Lighting Stud plugs into the 035 Super Clamp for lighting fixtures or connecting 2 Super Clamps 035 allowing them to rotate. It has a 1/4\" male thread.
Click For Info
This is a short locking handle which is used to mount all Manfrotto video ball heads to the 529B Hi-Hat.
Click For Info
The 520BALLSH comes complete with a short locking handle to mount all Manfrotto flat-base heads to any 75mm bowl tripod including the 529B Hi-Hat (with optional adapter 319).
Click For Info


