Seeed

Prev123456Next

Seeed 101020011 Grove - Temperature & Humidity Sensor ±2°C Accuracy

Seeed 101020011 Grove - Temperature & Humidity Sensor ±2Â...

Seeed 101020011 Grove - Temperature & Humidity Sensor ±2°c Accuracy: Seeed Grove - Environmental Sensor Modules - Seeed Studio 101020011, The Grove Temperature & Humidity Sensor from Seeed Studio is factory calibrated to ensure it functions well in your project. With and accuracy of ±2°C and ±5%RH this sensor is an easy choice for most applications. Libraries are provided for popular processors such as Arduino and Raspberry Pi. Seeed provide technical documentation, example projects and software libraries on their product pages. if you...

Seeed 101020047 Grove - 4 x Touch Sensor with Controller I2C Based...

Seeed 101020047 Grove - 4 X Touch Sensor With Controller I2c Based...

Seeed 101020047 Grove - 4 X Touch Sensor With Controller I2c Based...: Seeed Grove - Physical Sensor Modules - Seeed Studio 101020047, The Grove 4 x Touch Sensor from Seeed Studio consists of 4 x independant capacitative touch sensors and a sensing hub which houses the intelligence. The hub has an onboard processor which handles switch debounce plus I2C communication to the host microcontroller. Seeed provide technical documentation, example projects and software libraries on their product pages. if you require this information please visit this product\'s page....

Seeed 101020050 Grove - 3-Axis Digital Gyro Based on ITG3200

Seeed 101020050 Grove - 3-axis Digital Gyro Based On Itg3200

Seeed 101020050 Grove - 3-axis Digital Gyro Based On Itg3200: Seeed Grove Motion Sensor, Control and Actuator Modules - Seeed Studio 101020050, The Grove 3-axis Digital Gyro from Seeed Studio uses 3-axis MEMS technology to detect up to ±2000° per second of rotation. Data can be read from the gyro using fast mode I2C at up to 400kHz. The module also has a built-in temperature sensor, potentially saving you buying an additional sensor. Seeed provide technical documentation, example projects and software libraries on their product pages. if you...

Seeed 101020039 Grove - 3-Axis Digital Accelerometer (±1.5g) Based...

Seeed 101020039 Grove - 3-axis Digital Accelerometer (±1.5g) Based...

Seeed 101020039 Grove - 3-axis Digital Accelerometer (±1.5g) Based...: Seeed Grove Motion Sensor, Control and Actuator Modules - Seeed Studio 101020039, The Grove 3-axis Digital Accelerometer from Seeed Studio measures up to ±1.5g with a resolution of 6-bits. Connect this sensor to an I2C port on a Grove main board and use the downloadable library to read back the accelerometer data. Applications include robotics and smart vehicles, game controller, orientation detection and many others. Seeed provide technical documentation, example projects and software...

Seeed 103020005 Grove - Relay Add on Board 250V @ 10A

Seeed 103020005 Grove - Relay Add On Board 250v @ 10a

Seeed 103020005 Grove - Relay Add On Board 250v @ 10a: Seeed Grove - User Interface and Control Modules - Seeed Studio 103020005, The Grove Relay Board from Seeed Studio will let you switch on higher voltage equipment, up to 10A at 250V AC, or up to 30V DC. Screw terminal are provided to connect the device you want to switch. A single digital ouput line is used, a logic 1 turns the device on, a logic zero turns it off. Seeed provide technical documentation, example projects and software libraries on their product pages. if you require this...

Seeed 101020019 Grove - Temperature & Humidity Sensor Pro High Acc...

Seeed 101020019 Grove - Temperature & Humidity Sensor Pro High Acc...

Seeed 101020019 Grove - Temperature & Humidity Sensor Pro High Acc...: Seeed Grove - Environmental Sensor Modules - Seeed Studio 101020019, The Grove Temperature & Humidity Sensor from Seeed Studio is factory calibrated to ensure it functions well in your project. With and accuracy of 0.3°C and 2%rh this sensor is an easy choice for most applications. Libraries are provided for popular processors such as Arduino and Raspberry Pi. Seeed provide technical documentation, example projects and software libraries on their product pages. if you require this...

Seeed 101020073 Grove - Electromagnet Holds Up to 1KG @ 5V 400mA

Seeed 101020073 Grove - Electromagnet Holds Up To 1kg @ 5v 400ma

Seeed 101020073 Grove - Electromagnet Holds Up To 1kg @ 5v 400ma: Seeed Grove Motion Sensor, Control and Actuator Modules - Seeed Studio 101020073, The Grove Electromagnet from Seeed Studio will hold up to 1kg when energised with only 400mA at 5V DC. Because this current is beyond the capability of most microcontrollers there is an on-board logic MOSFET that can be switched on by a low-current logic signal. Seeed provide technical documentation, example projects and software libraries on their product pages. if you require this information please visit this...

Seeed 110060038 SideKick Basic Component Starter Kit for LinkItOne

Seeed 110060038 Sidekick Basic Component Starter Kit For Linkitone

Seeed 110060038 Sidekick Basic Component Starter Kit For Linkitone: Seeed-110060038-SideKick-Basic-Component-Starter-Kit-for-LinkitOne-Seeed-Studio-110060038-P-The-SideKick-Basic-Component-Starter-Kit-for-LinkItOne-from-Seeed-Studio-is-a-great-learning-resource-with-components-to-build-10-different-projects-Seeed-s-web-site-has-instructions-on-how-to-build-the-projects-arranged-as-a-series-of-lessons-which-introduce-you-to-every-aspect-of-the-LinkItOne-They-range-from-the-usual-blinking-an-LED-through-to-sending-commands-to-the-LinkItOne-via-text-message...

Seeed 110060004 ARDX Arduino Starter Kit Includes UNO Board

Seeed 110060004 Ardx Arduino Starter Kit Includes Uno Board

Seeed 110060004 Ardx Arduino Starter Kit Includes Uno Board: Seeed-110060004-ARDX-Arduino-Starter-Kit-Includes-UNO-Board-Seeed-Studio-110060004-p-The-ARDX-Starter-Kit-for-Arduino-from-Seeed-Studio-is-a-great-learning-resource-with-components-to-build-13-different-projects-Seeed-s-web-site-has-instructions-on-how-to-build-the-projects-arranged-as-a-series-of-lessons-which-introduce-you-to-every-aspect-of-the-ARDX-kit-They-range-from-the-usual-blinking-an-LED-through-to-using-the-Piezo-sensor-to-detect-vibration-Take-the-lessons-at-your-own-pace-an...

Seeed 103030006 Convert Arduino GPIO to Terminal Block Connections

Seeed 103030006 Convert Arduino Gpio To Terminal Block Connections

Seeed 103030006 Convert Arduino Gpio To Terminal Block Connections: Seeed-Convert-Arduino-GPIO-to-Terminal-Block-Connections-Seeed-Studio-103030006-p-The-Screw-Shield-from-Seeed-Studio-converts-the-GPIO-pins-on-your-Arduino-to-screw-terminals-This-pair-of-boards-sits-on-the-GPIO-pins-of-your-Arduino-and-also-allows-other-shields-to-be-stacked-on-top-Additional-contact-points-are-provided-for-Vin-Gnd-and-5V-plus-solder-pads-for-2-x-ADC-signals-An-extender-is-provided-for-the-ICSP-pins-too-p-Seeed-103030006-Convert-Arduino-GPIO-to-Terminal-Block-Connec...

Seeed 101020038 Grove - Magnetic Switch SPST Encapsulated Reed Type

Seeed 101020038 Grove - Magnetic Switch Spst Encapsulated Reed Type

Seeed 101020038 Grove - Magnetic Switch Spst Encapsulated Reed Type: Seeed Grove - Physical Sensor Modules - Seeed Studio 101020038, The Grove Magnetic Switch from Seeed Studio contains a dry reed switch that can be activated by a permanent magnet or electromagnet. The normally open switch is connected to a digital line and has a pull-down resistor giving a logic 0 signal. When a magnet approaches, the contacts close and the output goes to a logic 1. Seeed provide technical documentation, example projects and software libraries on their product pages. if you...

Seeed 102010027 BeagleBone Green 512MB RAM 4GB Flash Memory

Seeed 102010027 Beaglebone Green 512mb Ram 4gb Flash Memory

Seeed 102010027 Beaglebone Green 512mb Ram 4gb Flash Memory: Seeed-BeagleBone-Green-512MB-RAM-4GB-Flash-Memory-Seeed-Studio-102010027-P-The-BeagleBone-Green-from-Seeed-Studio-features-two-Grove-connectors-to-take-advantage-of-Seeed-s-extensive-collection-of-add-on-boards-This-new-board-is-just-like-the-BeagleBone-Black-except-the-HDMI-connector-has-been-removed-and-the-two-Grove-connectors-have-been-added-It-is-based-around-a-1GHz-ARM-Cortex-8-processor-with-512Mbytes-of-RAM-4Gbytes-of-Flash-a-3D-graphics-accelerator-a-floating-point-accelerator-...

Seeed 110060025 Sidekick Basic Component Starter Kit for Arduino V2

Seeed 110060025 Sidekick Basic Component Starter Kit For Arduino V2

Seeed 110060025 Sidekick Basic Component Starter Kit For Arduino V2: Seeed-110060025-Sidekick-Basic-Component-Starter-Kit-for-Arduino-V2-Seeed-Studio-110060025-P-The-SideKick-Basic-Component-Starter-Kit-for-Arduino-from-Seeed-Studio-is-a-great-learning-resource-with-components-to-build-7-different-projects-Seeed-s-website-has-instructions-on-how-to-build-the-projects-arranged-as-a-series-of-lessons-which-introduce-you-to-every-aspect-of-the-SideKick-kit-They-range-from-blinking-an-LED-through-to-controlling-the-position-of-a-servo-motor-Take-the-lessons-...

Seeed 113060000 Grove - 433MHz Simple RF Link Kit Transmitter and ...

Seeed 113060000 Grove - 433mhz Simple Rf Link Kit Transmitter And ...

Seeed 113060000 Grove - 433mhz Simple Rf Link Kit Transmitter And ...: Seeed Grove - Radio Frequency (RF) and Wireless Modules - Seeed Studio 113060000, The Grove - 433MHz Simple RF Link Kit from Seeed Studio consists of one transmitter and one receiver and is useful for remote control projects that don\'t require two-way communication. To attach one of these modules to a microcontroller simply plug into a Grove base board and use a serial transmit or receive signal, making it very light in terms of GPIO pins. Seeed provide technical documentation, example projects...

Seeed 103020014 Grove - Dry-Reed Relay Compact and Fast Switching

Seeed 103020014 Grove - Dry-reed Relay Compact And Fast Switching

Seeed 103020014 Grove - Dry-reed Relay Compact And Fast Switching: Seeed Grove Motion Sensor, Control and Actuator Modules - Seeed Studio 103020014, The Grove Dry Reed Relay from Seeed Studio allows your microcontroller project to switch power to light, resistive loads of up to 1A at 60V DC. Reed relays are different from normal relays as their contacts are sealed in a glass tube, protecting them from corrosion giving them a long life. The Grove module has two screw terminal contacts for attaching the load. Seeed provide technical documentation, example...

Seeed 113990010 433MHz RF Transmitter and Receiver Link Kit

Seeed 113990010 433mhz Rf Transmitter And Receiver Link Kit

Seeed 113990010 433mhz Rf Transmitter And Receiver Link Kit: Seeed 433MHz RF Transmitter and Receiver Link Kits - Seeed Studio 113990010, The 433Mhz RF Transmitter and Receiver kit from Seeed Studio consists of one transmitter and one receiver and is useful for remote control projects that don\'t require two-way communication. To attach one of these modules to a microcontroller you need to supply power (3.3 to 6V DC) and either a serial transmit or receive signal, so it\'s very light in terms of GPIO pins. Seeed 113990010 433MHz RF Transmitter and...

Seeed 113990018 2KM Long Range RF Transmitter and Receiver Link Kits

Seeed 113990018 2km Long Range Rf Transmitter And Receiver Link Kits

Seeed 113990018 2km Long Range Rf Transmitter And Receiver Link Kits: Seeed 433MHz RF Transmitter and Receiver Link Kits - Seeed Studio 113990018, The Long Range RF Transmitter and Receiver kit from Seeed Studio consists of one transmitter and one receiver and is useful for remote control projects that don\'t require two-way communication. To attach one of these modules to a microcontroller you need to supply power and 4 digital data lines, so it\'s light in terms of GPIO pins. Seeed provide technical documentation, example projects and software libraries on their...

Seeed 113020001 Grove - 315MHz Simple RF Link Kit Transmitter and ...

Seeed 113020001 Grove - 315mhz Simple Rf Link Kit Transmitter And ...

Seeed 113020001 Grove - 315mhz Simple Rf Link Kit Transmitter And ...: Seeed Grove - Radio Frequency (RF) and Wireless Modules - Seeed Studio 113020001, The Grove - 315MHz Simple RF Link Kit from Seeed Studio consists of one transmitter and one receiver and is useful for remote control projects that don\'t require two-way communication. To attach one of these modules to a microcontroller simply plug into a Grove base board and use a serial transmit or receive signal, making it very light in terms of GPIO pins. Seeed provide technical documentation, example projects...

Seeed 316040001 Mini Vibration Motor 3V 2.0mm Circular

Seeed 316040001 Mini Vibration Motor 3v 2.0mm Circular

Seeed 316040001 Mini Vibration Motor 3v 2.0mm Circular: Seeed-Mini-Vibration-Motor-3V-2-0mm-Circular-Seeed-Studio-316040001-p-The-Mini-Vibration-Motor-from-Seeed-Studio-operates-from-3V-DC-and-vibrates-constantly-when-energised-The-motor-is-not-sensitive-to-the-polarity-of-the-voltage-applied-p-p-Seeed-provide-technical-documentation-example-projects-and-software-libraries-on-their-product-pages-if-you-require-this-information-a-href-http-www-seeedstudio-com-depot-Mini-vibration-motor-20mm-p-2300-html-please-visit-this-product-s-page-...

Seeed 113990012 M1 RFID Fob Style Tag 13.56MHz

Seeed 113990012 M1 Rfid Fob Style Tag 13.56mhz

Seeed 113990012 M1 Rfid Fob Style Tag 13.56mhz: Seeed RFID Tags 13.56MHz - Seeed Studio 113990012, The 13.56MHz M1 RFID Fob from Seeed Studio is a small, easy to carry tag which operates at 13.56MHz. If your NFC/RFID reader can read Mifare cards at 13.56MHz then it can probably read these. Applications include access control, customer identification, object tracking and others. Seeed provide technical documentation, example projects and software libraries on their product pages. if you require this information please visit this product\'s...


Prev123456Next