Strat For

Prev12345Next

Adafruit 802 1.8\" TFT Display S...

Adafruit-802-1-8-TFT-Display-Shield-for-Arduino-Micro-SD-and-Joystick-Adafruit-802-P-The-Adafruit-1-8in-Colour-TFT-shield-displays-full-18-bit-colour-with-a-resolution-of-128-x-160-The-neat-display-is-complimented-by-a-5-way-joystick-for-user-input-and-a-micro-SD-card-socket-for-FAT16-FAT32-format-c...



Click For Info
Seeed 110060039 Grove Kit for Li...

Seeed-110060039-Grove-Kit-for-LinkitOne-IoT-Development-Board-Seeed-Studio-110060039-p-The-Grove-IoT-Development-Kit-for-LinkItOne-from-Seeed-Studio-gets-you-off-to-a-flying-start-on-your-next-project-Experiment-with-the-idea-of-IoTicity-with-10-of-Seeed-s-most-popular-Grove-modules-for-the-Internet...



Click For Info
Pimoroni PIM113 Display-O-Tron R...

Pimoroni-Display-O-Tron-RGB-16x3-LCD-Display-for-Raspberry-Pi-for-A-B-Pi-2-Pimoroni-PIM113-An-upgraded-HAT-version-of-the-Display-O-Tron-now-with-capacitive-touch-pads-a-six-zone-RGB-backlight-and-GPIO-breakout-pins-Features-a-super-slim-16-x-3-character-LCD-which-has-a-full-ASCII-character-set-wher...



Click For Info
Blueberry TXRX ABS Case for 75-0...

Blueberry Home Solutions Smart Hub for Raspberry Pi - Blueberry TXRXABS, This showerproof ABS case for the Blueberry wireless temperature and humidity sensor is designed to hold 1 x sensor board and 1 x PP3 battery. Using low power modes on the sensor board will allow it to transmit for up to a...



Click For Info
Adafruit 1092 Tactile On/Off Swi...

Adafruit Sewable Power for Wearables - Adafruit 1092, The Adafruit Tactile On/Off Switch is ideal for wearables with its squeeze to switch on, squeeze to switch off action. Measuring only 16 x 16 x 6mm it can handle 2A at up to 14V. Supplied with 190mm (7.5in.) wire tails. Adafruit 1092 Tactile...



Click For Info
StarTech.com DVI Docking Station...

StarTech.com DVI Docking Station for Laptops - USB 3.0 - Universal Laptop Docking Station - DVI Laptop Dock for Hot Desks - 4 x USB Ports - 4 x USB 3.0 - Network (RJ



Click For Info
StarTech.com HDMI Docking Statio...

StarTech.com HDMI Docking Station for Laptops - USB 3.0 - Universal Laptop Docking Station - HDMI Laptop Dock for Hot Desks - 4 x USB Ports - 4 x USB 3.0 - Network (



Click For Info
Adafruit 2310 Perma-Proto HAT fo...

Adafruit-Perma-Proto-HAT-for-Raspberry-Pi-A-B-or-2-Adafruit-2310-The-b-Adafruit-Perma-Proto-HAT-b-is-a-plug-in-daughterboard-that-is-compatible-with-the-Raspberry-Pi-A-B-and-Pi-2-The-board-has-a-grid-of-0-1-prototyping-solder-holes-for-attaching-chips-resistors-LEDs-potentiometers-etc-to-create-a-ve...



Click For Info
4world Desk Mount For Lcd/tv 13-...

A desk mount for LCD/TV sized at 13 - 24 inches. Suitable for 2 screens with adjustable height and arms with a maximum load of 15kg. Features- Desk mount- For LCD/TV 13 - 24 inch- For 2 screens with adjustable height and ...



Click For Info
StarTech.com 4K DisplayPort Dock...

StarTech.com 4K DisplayPort Docking Station for Laptops - USB 3.0 - Universal Laptop Docking Station - 4K DP Laptop Dock for Hot Desks - 4 x USB Ports - 4 x USB 3.0



Click For Info
Adafruit 2927 DC Motor + Stepper...

Adafruit FeatherWing Add-ons For All Feather Boards - Adafruit 2927, The Adafruit DC Motor + Stepper FeatherWing Add-ons will let you use 2 x bi-polar stepper motors or 4 x brushed DC motors (or 1 stepper and 2 DC motors). That\'s enough for a cool 4-wheel drive robot or the X and Y axis for a 3D...



Click For Info
Adafruit 1163 SMT Breakout PCB f...

Adafruit SMT Breakout PCB for QFN or TQFP 32 Pin - Adafruit 1163, The Adafruit SMT Breakout PCBs for 32-pin QFN or TQFP solve the problem that not all chips are available in breadboard friendly packages. With QFN pinouts on one side and TQFP pinouts on the other the boards also have space for...



Click For Info
FUZE for Raspberry Pi Complete K...

FUZE for Raspberry Pi - FUZE FUZE-RPi-A1, The FUZE for Raspberry Pi provides an ideal workstation to house your Pi and retains all connectivity via the easily accessible back panel. The solid metal case provides a robust and secure housing for the usually fragile Raspberry Pi board. The unit comes...



Click For Info
Seeed 110060024 Grove Starter Ki...

Seeed-110060024-Grove-Starter-Kit-V3-For-Arduino-Seeed-Studio-110060024-P-The-Grove-Starter-Kit-for-Arduino-from-Seeed-Studio-gets-you-off-to-a-flying-start-on-your-next-project-It-includes-10-of-their-most-popular-Grove-modules-but-what-is-Grove-Seeed-describe-it-as-a-modular-electronic-platform-fo...



Click For Info
Adafruit 2884 FeatherWing Proto ...

Adafruit FeatherWing Add-ons For All Feather Boards - Adafruit 2884, The Adafruit FeatherWing Proto Prototyping Boards gives you a place to mount your custom circuitry once your breadboard prototype is working. All the Feather signals are brought to pads, there\'s a row of 3.3V pads, another of Gnd...



Click For Info
Seeed 110060422 Grove IoT Develo...

Seeed-Studio-Grove-IoT-Developer-Kit-Microsoft-Azure-Edition-Seeed-Studio-110060422-This-developer-kit-contains-everything-required-for-rapid-prototyping-using-the-supplied-Intel-Edison-module-Intel-Edison-for-Arduino-and-the-Grove-Base-Shield-V2-sensors-and-actuators-Simply-plug-in-the-modules-to-s...



Click For Info
Makeblock 94010 Electronic Add o...

Makeblock-94010-Electronic-Add-on-Pack-for-Me-Robots-8x-Modules-Makeblock-94010-This-add-on-pack-contains-8x-electronic-modules-that-can-be-used-with-Makeblock-mBots-to-expand-their-versatility-and-to-be-able-to-build-better-projects-br-br-For-further-details-please-see-a-href-http-www-makeblock-com...



Click For Info
Makeblock 13035 Bluetooth Module...

Makeblock-13035-Bluetooth-Module-for-mBot-Makeblock-13035-This-b-Bluetooth-b-module-is-designed-to-enable-b-wireless-b-connectivity-for-any-Bluetooth-enabled-b-Makeblock-b-equipment-When-the-module-is-installed-in-an-b-mBot-b-it-can-be-controlled-wirelessly-from-smart-phones-tablets-computers-etc-br...



Click For Info
Adafruit 653 Sewable CR2032 Batt...

Adafruit Sewable Power for Wearables - Adafruit 653, The Adafruit Sewable Battery Holder is ideal for providing power to your next wearable project. It accepts the popular CR2032 sized batteries which are usually 3V at 200mAh. The battery holder has holes in the +ve and -ve tabs which will accept a...



Click For Info
Power Supply for Raspberry Pi 3 ...

TruPower-Plugtop-PSU-for-Raspberry-Pi-3-2-5A-5-1V-Trupower-Pi3PSU-This-plugtop-power-supply-can-supply-the-b-Raspberry-Pi-3-b-with-2-5A-it-requires-for-operation-The-PSU-features-a-universal-voltage-input-and-a-long-MTBF-of-50-000-hours-Power-Supply-for-Raspberry-Pi-3-5-1V-2-5A



Click For Info
MSP-EXP430G2 LaunchPad Texas Ins...

TI-LaunchPad-Experimenter-Board-for-MSP4302xx-Microcontroller-Texas-Instruments-MSP-EXP430G2-Part-of-the-Texas-Instrument-range-of-LaunchPad-Microcontroller-Evaluation-Kits-the-MSP-EXP430G2-is-a-low-cost-experimenter-and-development-board-for-the-Texas-Instruments-MSP430G2xx-Value-Line-series-of-ult...



Click For Info
Dynamode USB 2.0 SATA External H...

Need a low cost Hard Disk enclosure for your 2.5 inch disk drives?. Or do you want to make use of an old laptop hard disk for cheap offline storage for your digital world?. The new USB-HD2.5S from Dynamode is a stylish h...



Click For Info
Microchip DM240013-2 Microstick ...

Microchip-Microstick-for-PIC24-K-Series-Devices-Microchip-DM240013-2-The-Microstick-is-a-simple-and-effective-development-platform-for-5V-PIC24-K-series-16-bit-microcontrollers-The-compact-board-includes-a-socket-for-the-target-microcontroller-an-integrated-programmer-debugger-and-the-board-is-desig...



Click For Info
Microchip DM240415 Accessory Dev...

Microchip-PIC24F-Accessory-Development-Starter-Kit-For-Android-Microchip-DM240415-This-standalone-development-kit-enables-the-evaluation-and-development-of-applications-and-accessories-for-the-Google-Android-operating-system-for-use-on-smartphones-and-tablets-The-kit-is-based-around-a-PIC24F-16-bit-...



Click For Info
LogiLink® BT0021 Bluetooth-Do...

LogiLink-BT0021-Bluetooth-Audio-Receiver-for-Apple-Dock-Connector-LogiLink-BT0021-P-align-left-This-Bluetooth-Dongle-for-an-iPhone-iPod-Docking-Station-from-LogiLink-reg-can-convert-an-iDevice-dock-speaker-into-a-wireless-speaker-system-Designed-so-that-no-software-or-drivers-are-required-this-quali...



Click For Info
LogiLink® UA0094 USB Sync- An...

LogiLink-USB-Sync-and-Charging-Cable-for-iPod-and-iPhone-LogiLink-UA0094-P-align-left-This-USB-Sync-and-Charging-Cable-for-iPod-reg-and-iPhone-reg-from-LogiLink-reg-is-the-perfect-accessory-for-charging-or-synching-an-iPod-reg-or-iPhone-reg-and-remains-compatible-with-both-a-Mac-and-desktop-computer...



Click For Info
LogiLink® QP0010 Quickport US...

LogiLink-Quickports-USB-2-0-3-0-for-Two-2-5-3-5-SATA-LogiLink-QP0010-P-This-USB-3-0-Quickport-for-Two-2-5-3-5-SATA-from-LogiLink-reg-has-been-designed-for-simple-access-of-all-2-5in-or-3-5in-SATA-hard-drives-to-your-computer-without-using-an-external-hard-drive-enclosure-just-connect-the-included-US...



Click For Info
LogiLink® AA0019 Apple Dock A...

LogiLink-Apple-Dock-Adaptor-to-Micro-USB-for-iPad-iPhone-iPod-LogiLink-AA0019-P-align-left-This-Apple-Dock-Adaptor-to-Micro-USB-for-iPad-reg-iPhone-reg-iPod-reg-from-LogiLink-reg-ioffers-the-perfect-solution-for-charging-and-syncing-an-iPad-reg-iPhone-reg-or-iPod-reg-via-your-computer-courtesy-of-th...



Click For Info
LogiLink® ID0017 Mousepad XXL...

LogiLink-ID0017-Mousepad-XXL-for-Gaming-and-Graphic-Design-LogiLink-ID0017-P-align-left-This-XXL-Mousepad-for-Gaming-and-Graphic-Design-from-LogiLink-reg-is-compatible-with-all-mouse-types-ball-optical-laser-therefore-making-it-an-ideal-choice-for-gamers-and-graphic-designers-Designed-with-a-large-w...



Click For Info
LogiLink® UA0166 USB Sync- &a...

LogiLink-USB-Sync-and-Charging-Cables-for-iPod-iPhone-1m-LogiLink-UA0166-P-align-left-LogiLink-s-reg-Pink-USB-Sync-and-Charging-Cable-can-be-used-as-a-data-charger-cable-for-the-iPhone-reg-iPhone-reg-3G-iPhone-reg-3GS-iPhone-reg-4-4S-iPad-reg-Also-suitable-for-charging-an-iPod-reg-iPhone-reg-and-iPa...



Click For Info
Bio-Tech EC-01 Plastic housing f...

Plastic-Housing-EC-01-for-Bio-Tech-ARS-Flow-Controller-Bio-Tech-EC-01-Empty-housing-in-grey-PVC-lead-sealable-with-cut-out-and-2-x-PG7-cable-glands-type-EC-01-Suitable-for-ARS-260-261-consumption-indicator-flow-controller-Bio-Tech-EC-01-Plastic-housing-for-ARS



Click For Info
StarTech 0.65m Apple Dock Connec...

The USB2UBADC1M Apple Dock Connector/Micro USB to USB Combo Cable (0.65m) offers a simple and reliable solution for connecting Micro USB or iOS-enabled mobile digital devices to your computer for syncing or charging. For ...



Click For Info
Labfacility XE-1824-001 4 Way Pa...

Panels for Standard Panel Mount Thermocouple Sockets with Mounting Brackets - Labfacility XE-1824-001, A 1 row x 4 hole connector panel faceplate suitable for standard-sized panel mount thermocouple sockets that are fitted with stainless steel mounting brackets. Labfacility XE-1824-001 4 Way Panels...



Click For Info
LaCie 6big 48TB Thunderbolt 3 + ...

Delivers Thunderbolt 3 speeds for 4K video editing. and hardware RAID 5/6 for no-compromise data security. Combines a RAID controller and 7200 RPM HDDs for sustained speeds of up to 1400MB/s turbocharging 4K workflow...



Click For Info
LaCie 12big 96TB Thunderbolt 3 +...

Delivers Thunderbolt 3 speeds for 4K video editing. and hardware RAID 5/6 for no-compromise data security. Combines a RAID controller and 7200 RPM HDDs for sustained speeds of up to 2600MB/s turbocharging 4K workflow...



Click For Info
Labfacility XE-1829-001 12 Way P...

Panels for Standard Panel Mount Thermocouple Sockets with Mounting Brackets - Labfacility XE-1829-001, A 1 row x 12 hole connector panel faceplate suitable for standard-sized panel mount thermocouple sockets that are fitted with stainless steel mounting brackets. Labfacility XE-1829-001 12 Way...



Click For Info
Labfacility XE-1822-001 2 Way Pa...

Panels for Standard Panel Mount Thermocouple Sockets with Mounting Brackets - Labfacility XE-1822-001, A 1 row x 2 hole connector panel faceplate suitable for standard-sized panel mount thermocouple sockets that are fitted with stainless steel mounting brackets. Labfacility XE-1822-001 2 Way Panels...



Click For Info
Labfacility XE-1826-001 6 Way Pa...

Panels for Standard Panel Mount Thermocouple Sockets with Mounting Brackets - Labfacility XE-1826-001, A 1 row x 6 hole connector panel faceplate suitable for standard-sized panel mount thermocouple sockets that are fitted with stainless steel mounting brackets. Labfacility XE-1826-001 6 Way Panels...



Click For Info
Labfacility XE-1726-001 6 Way Pa...

Panels for Miniature Panel Mount Thermocouple Sockets with Mounting Brackets - Labfacility XE-1726-001, A 1 row x 6 hole connector panel suitable for miniature panel mount thermocouple sockets that are fitted with stainless steel mounting brackets Labfacility XE-1726-001 6 Way Panels for Miniature...



Click For Info
Labfacility XE-1729-001 12 Way P...

Panels for Miniature Panel Mount Thermocouple Sockets with Mounting Brackets - Labfacility XE-1729-001, A 1 row x 12 hole connector panel suitable for miniature panel mount thermocouple sockets that are fitted with stainless steel mounting brackets Labfacility XE-1729-001 12 Way Panels for...



Click For Info

Prev12345Next