Results for trend trend corner chisel
Trend Trend Corner ChiselA useful, hammer driven device that squares off corners on hinge recesses and routed corners in one swift & simple operation.
Click For Info
Trend Trend Corner ChiselA useful, hammer driven device that squares off corners on hinge recesses and routed corners in one swift & simple operation.
Click For Info
Corner chisel HSSAllows a rounded recess in wood to be cut to a square recess with the use of a hammer Ideal for squaring hinge recesses in door frames and door edges as well as lock faceplates Spring loaded high...
Click For Info
70mm Silverline Corner ChiselChisel held in a spring-loaded, aluminium-bodied jig For knocking out rounded corners from a routed hinge recess Hit once with a mallet and pare out waste.
Click For Info
Trend Trend SNAP/PC/38 Snappy 3/8 Diameter Plug Cutter - 1/4 hex ShankTrend SNAP/PC/38 Trend Snappy 3/8 diameter plug cutter is made from Tool Steel, allowing longer plugs to be drilled. Plugs are very slightly tapered. Recommended for use with a pillar drill.
Click For Info
Trend Trend SNAP/TH5/SET Snappy 22 piece Kitchen Fitters set22 piece Trend Snappy kitchen fitting set in heavy duty fabric tool holder. Includes: 1 x Quick chuck 1 x Drill bit guide 7/64" (2.5mm) 1 x Hex drill 2mm 1 x Hex drill 3mm 1 x Flat bit 19mm 1 x Flat...
Click For Info
Trend Trend FTS/S/P - Replacement FastTrack Preperation StoneA coarse preperation stone for the Trend Fasttrack sharpening system.
Click For Info
Trend Trend FTS/S/SFF - Fast Track Roughing StoneMake sharpening easy with this Fasttrack sharpening system from Trend.
Click For Info
Trend Trend SNAP/TH3/SET Snappy 60 piece Impact Driver Tool Set60 piece Trend Snappy Impact Driver set in heavy duty fabric tool holder. Includes: 1 x Masonry drill 5mm 1 x Masonry drill 6mm 1 x Masonry drill 7mm 1 x Masonry drill 8mm 1 x Hex drill 1.5mm 1 x Hex...
Click For Info
Trend Trend BSC/MIX/100 Mixed Jointing Biscuits (Pack of 100)A pack of 100 simple, easy to use and effective Jointing biscuits from Trend, manufactured to expand on contact with woodworking adhesives to a tight joint. Compared to doweling, biscuit jointing is...
Click For Info
Trend Trend BSC/20/100 NO.20 Jointing Biscuits (Pack of 100)A pack of 100 simple, easy to use and effective Jointing biscuits from Trend, manufactured to expand on contact with woodworking adhesives to a tight joint. Compared to doweling, biscuit jointing is...
Click For Info
Trend Trend \'Pro Grabit\' Damaged Bolt & Screw RemoverTrend\'s useful power-drill driven, 2-piece \'Pro Grabit\' provides the perfect solution for removing damaged screws & fasteners. Each ingeniously designed \'bit\' is double-ended - one \'end\' is...
Click For Info
Trend Trend BSC/10/100 NO.10 Jointing Biscuits (Pack of 100)A pack of 100 simple, easy to use and effective jointing biscuits from Trend, manufactured to expand on contact with woodworking adhesives to a tight joint. Compared to doweling, biscuit jointing is...
Click For Info
Trend Trend BSC/0/100 NO.0 Jointing Biscuits (Pack of 100)A pack of 100 simple, easy to use and effective Jointing biscuits from Trend, manufactured to expand on contact with woodworking adhesives to a tight joint. Compared to doweling, biscuit jointing is...
Click For Info
Trend Trend T4ELK Router (110V)The Trend T4 is a light duty plunge router which is suitable for the hobbyist and light trade user.
Click For Info
Trend Trend No. 20 Biscuits ( Pack of 1000)These Trend biscuits are made of die cut beech for improved durability. They are ideal for strong, fast, and accurate jointing of hard and soft woods, plywood and composition board as they expand...
Click For Info
Trend Trend \'Snappy\' Angled Screwdriver Attachment90° angled attachment that fits to most corded and cordless drills (with a 10mm or 13mm three jaw chuck), for use with Trend \'Snappy\' shanked drilling & screwdriving accessories.
Click For Info
Trend Trend AIR/P/7 Remote battery charger for air/proRemote battery cradle to allow charging of a battery away from the AIR/PRO.
Click For Info
Trend Trend \'Airace\' Half Mask RespiratorThis super efficient half-face mask, designed to prevent the inhalation of natural & processed timber dust, has a filter surface area five times larger than the average disposable mask. It features a...
Click For Info
Trend Trend DAR/200 - 200mm Digital Angle RuleA 200mm digital angle rule that calculates angles quickly and accurately and is ideal for woodworking, construction, and machining.
Click For Info
Trend Trend 500mm Digital Angle RuleManufactured from durable and lightweight stainless steel this 500mm digital angle rule has a measuring capacity of 1000mm and 000.0 deg to 360.0 deg. It's easy to operate, with two press buttons and...
Click For Info
Trend Trend \'Anglefix®\' Mitre GuideA very useful guide when cutting frames, skirting, architrave and beading and also for general marking out. The Angleflex® guide automatically halves angles to make cutting mitres simple, easy and...
Click For Info
Trend Trend Point - 2 - PointAn incredibly useful \'scissor\' type measuring device that instantly & precisely locates evenly spaced positions for dowels, screws, biscuits, pins and for drilling holes.
Click For Info
Trend Trend Digital Depth GaugeA digital depth gauge for horizontal and vertical measuring. For use on hand routers, router tables and saw benches. Also ideal for use with dovetail jig and mortise and tenon set ups.
Click For Info
Trend Trend Door ClampA clamp to hold open doors whilst drilling the holes for, and fitting, locks. Made from a lightweight non scratch solid steel and is suitable for firmly gripping doors up to 55mm thick. The clamp is...
Click For Info
Trend Trend CS/4MMTC Snappy Countersink 4x9.5mm TCTHeat treated tool steel countersink with a HSS drill. This tool can be used in abrasive materials such as laminated chipboard. The drill produces pilot holes only.
Click For Info
Trend Trend CS/4 Snappy Countersink with 5/64 DrillHeat treated tool steel countersink with a HSS drill. The adjustable design allows for different length screws and can produce a counterbored hole for woodplugs. The drill produces pilot holes only.
Click For Info
Trend Trend AIR/P/7 Remote battery charger for air/proRemote battery cradle to allow charging of a battery away from the AIR/PRO.
Click For Info
Trend Trend CS/12 Snappy Countersink with 9/64 DrillHeat treated tool steel countersink with a HSS drill. The adjustable design allows for different length screws and can produce a counterbored hole for woodplugs. The drill produces pilot holes only.
Click For Info
Trend Trend DAF/8 8\" Digital Angle FinderThis angle finder features a large clear LCD display with digital readout to allow easy reading of angles. Calculates angles from 0-220 degrees. Up to 360 degrees when locking knob is removed.
Click For Info
Trend Trend UNI/CS - Universal CountersinkThis TCT countersink clamps onto any drill between 3.0mm and 7.2mm in diameter. Recommended for wood and man-made boards. By reversing the countersink on the drill, it can be used as a non-cutting...
Click For Info
Trend Trend Digital Level BoxFind the angle on a surface quickly and accurately. This level box features a magnetic base for hands free use - ideal for table or mitre saws.
Click For Info
Trend Trend Universal Door Clamp & StandA mobile, solid steel stand that firmly holds a door on its edge so routing out hinge recesses and holes mortise for locks can be done easily. It features an anti-tilt non scratch base and enables...
Click For Info
Trend Trend Digital Depth GaugeA digital depth gauge for horizontal and vertical measuring. For use on hand routers, router tables and saw benches. Also ideal for use with dovetail jig and mortise and tenon set ups.
Click For Info
Trend Trend 500mm Digital Angle RuleManufactured from durable and lightweight stainless steel this 500mm digital angle rule has a measuring capacity of 1000mm and 000.0 deg to 360.0 deg. It's easy to operate, with two press buttons and...
Click For Info
Trend Trend PH/7X30/500 7x30mm Pocket Hole Self Tapping Screws (500 Pack)A pack of 500 7x30mm self tapping screws to be used with the pocket hole jig to join workpieces together to create tight strong joints.
Click For Info
Trend Trend LOC/BLK/PK1 - Pack Of 4 Loc Block Workpiece SupportsPack of four interlocking gripping blocks which lock together to allow the workpiece to be held in place when sanding, drilling and finishing.
Click For Info
Trend Trend Point - 2 - PointAn incredibly useful \'scissor\' type measuring device that instantly & precisely locates evenly spaced positions for dowels, screws, biscuits, pins and for drilling holes.
Click For Info
Trend Trend Snappy Snap/SQ/2 - Square No2 Bit - Pack Of 3This product includes: 3 x Robertson No 2 Screwdriver bits
Click For Info







































