Results for trend trend corner chisel
A useful, hammer driven device that squares off corners on hinge recesses and routed corners in one swift & simple operation.
Click For Info
A useful, hammer driven device that squares off corners on hinge recesses and routed corners in one swift & simple operation.
Click For Info
Allows a rounded recess in wood to be cut to a square recess with the use of a hammer Ideal for squaring hinge recesses in door frames and door edges as well as lock faceplates Spring loaded high speed steel HSS anvil for a sharp cut and long life Light weight aluminium body design Can be used with...
Click For Info
Chisel held in a spring-loaded, aluminium-bodied jig For knocking out rounded corners from a routed hinge recess Hit once with a mallet and pare out waste.
Click For Info
Trend SNAP/PC/38 Trend Snappy 3/8 diameter plug cutter is made from Tool Steel, allowing longer plugs to be drilled. Plugs are very slightly tapered. Recommended for use with a pillar drill.
Click For Info
22 piece Trend Snappy kitchen fitting set in heavy duty fabric tool holder. Includes: 1 x Quick chuck 1 x Drill bit guide 7/64" (2.5mm) 1 x Hex drill 2mm 1 x Hex drill 3mm 1 x Flat bit 19mm 1 x Flat bit 25mm 1 x Masonry bit 6mm 1 x Masonry bit 7mm 1 x Magnetic screwdriver holder 1 x Screwdriver bit...
Click For Info
60 piece Trend Snappy Impact Driver set in heavy duty fabric tool holder. Includes: 1 x Masonry drill 5mm 1 x Masonry drill 6mm 1 x Masonry drill 7mm 1 x Masonry drill 8mm 1 x Hex drill 1.5mm 1 x Hex drill 2mm 1 x Hex drill 2.5mm 1 x Hex drill 3mm 1 x Hex drill 4mm 1 x Hex drill 5mm 1 x Hex drill...
Click For Info
A pack of 100 simple, easy to use and effective Jointing biscuits from Trend, manufactured to expand on contact with woodworking adhesives to a tight joint. Compared to doweling, biscuit jointing is faster and more precise and these biscuits make the task even more simple. For strong, fast and...
Click For Info
A pack of 100 simple, easy to use and effective Jointing biscuits from Trend, manufactured to expand on contact with woodworking adhesives to a tight joint. Compared to doweling, biscuit jointing is faster and more precise and these biscuits make the task even more simple. For strong, fast and...
Click For Info
Trend\'s useful power-drill driven, 2-piece \'Pro Grabit\' provides the perfect solution for removing damaged screws & fasteners. Each ingeniously designed \'bit\' is double-ended - one \'end\' is used as a burnisher to effectively clean out the damaged fastener head. Rotating the \'bit\' reveals...
Click For Info
A pack of 100 simple, easy to use and effective jointing biscuits from Trend, manufactured to expand on contact with woodworking adhesives to a tight joint. Compared to doweling, biscuit jointing is faster and more precise and these biscuits make the task even more simple. For strong, fast and...
Click For Info
A pack of 100 simple, easy to use and effective Jointing biscuits from Trend, manufactured to expand on contact with woodworking adhesives to a tight joint. Compared to doweling, biscuit jointing is faster and more precise and these biscuits make the task even more simple. For strong, fast and...
Click For Info
The Trend T4 is a light duty plunge router which is suitable for the hobbyist and light trade user.
Click For Info
These Trend biscuits are made of die cut beech for improved durability. They are ideal for strong, fast, and accurate jointing of hard and soft woods, plywood and composition board as they expand when in contact with a woodworking adhesive such as PVA glue.
Click For Info
90° angled attachment that fits to most corded and cordless drills (with a 10mm or 13mm three jaw chuck), for use with Trend \'Snappy\' shanked drilling & screwdriving accessories.
Click For Info
This super efficient half-face mask, designed to prevent the inhalation of natural & processed timber dust, has a filter surface area five times larger than the average disposable mask. It features a one-way exhaust valve that vents underneath the mask to prevent safety visors or goggles fogging,...
Click For Info
A 200mm digital angle rule that calculates angles quickly and accurately and is ideal for woodworking, construction, and machining.
Click For Info
Manufactured from durable and lightweight stainless steel this 500mm digital angle rule has a measuring capacity of 1000mm and 000.0 deg to 360.0 deg. It's easy to operate, with two press buttons and a digital read out this rule simply locks into place for ease of use.
Click For Info
A very useful guide when cutting frames, skirting, architrave and beading and also for general marking out. The Angleflex® guide automatically halves angles to make cutting mitres simple, easy and ensuring accurate results.
Click For Info
An incredibly useful \'scissor\' type measuring device that instantly & precisely locates evenly spaced positions for dowels, screws, biscuits, pins and for drilling holes.
Click For Info
A digital depth gauge for horizontal and vertical measuring. For use on hand routers, router tables and saw benches. Also ideal for use with dovetail jig and mortise and tenon set ups.
Click For Info
A clamp to hold open doors whilst drilling the holes for, and fitting, locks. Made from a lightweight non scratch solid steel and is suitable for firmly gripping doors up to 55mm thick. The clamp is padded to prevent floor and door damage.
Click For Info
Heat treated tool steel countersink with a HSS drill. This tool can be used in abrasive materials such as laminated chipboard. The drill produces pilot holes only.
Click For Info
Heat treated tool steel countersink with a HSS drill. The adjustable design allows for different length screws and can produce a counterbored hole for woodplugs. The drill produces pilot holes only.
Click For Info
Heat treated tool steel countersink with a HSS drill. The adjustable design allows for different length screws and can produce a counterbored hole for woodplugs. The drill produces pilot holes only.
Click For Info
This angle finder features a large clear LCD display with digital readout to allow easy reading of angles. Calculates angles from 0-220 degrees. Up to 360 degrees when locking knob is removed.
Click For Info
This TCT countersink clamps onto any drill between 3.0mm and 7.2mm in diameter. Recommended for wood and man-made boards. By reversing the countersink on the drill, it can be used as a non-cutting depth stop. Ensures flutes of drill are aligned with flutes of countersink. Do not overtighten screw....
Click For Info
Find the angle on a surface quickly and accurately. This level box features a magnetic base for hands free use - ideal for table or mitre saws.
Click For Info
A mobile, solid steel stand that firmly holds a door on its edge so routing out hinge recesses and holes mortise for locks can be done easily. It features an anti-tilt non scratch base and enables the door to be tilted back to allow fitting into frame.
Click For Info
A digital depth gauge for horizontal and vertical measuring. For use on hand routers, router tables and saw benches. Also ideal for use with dovetail jig and mortise and tenon set ups.
Click For Info
Manufactured from durable and lightweight stainless steel this 500mm digital angle rule has a measuring capacity of 1000mm and 000.0 deg to 360.0 deg. It's easy to operate, with two press buttons and a digital read out this rule simply locks into place for ease of use.
Click For Info
A pack of 500 7x30mm self tapping screws to be used with the pocket hole jig to join workpieces together to create tight strong joints.
Click For Info
Pack of four interlocking gripping blocks which lock together to allow the workpiece to be held in place when sanding, drilling and finishing.
Click For Info
An incredibly useful \'scissor\' type measuring device that instantly & precisely locates evenly spaced positions for dowels, screws, biscuits, pins and for drilling holes.
Click For Info





